Upgrade the aesthetics, feel, and control of your Glock with the SI Improved Flat Trigger. More than just an attractive alternative, the geometry of the trigger facilitates optimum finger placement and breaking angle. The solid aluminum construction eliminates flex, provides crisper feedback, and better consistency than the stock polymer trigger. The Strike Industries G-IFT features enhanced geometry that improves control by providing increased surface area for your trigger finger and breaks when the trigger is 90 degrees from the frame. The combination of these factors facilitates the ideal straight to the rear trigger pull for best accuracy. In addition, the trigger safety is dramatically improved from the factory polymer. The IFT uses a drop tested billet aluminum safety that has greater bearing surface against the frame, greater durability, and is compatible with pre-travel reductions without modification to the frame or safety.
Compatibility: Gen 1-4 17,17L,19,22,23,24,26,27,31,32,33,34,35 models only.
- Materials:Anodized 6061 Al
- Finish: Anodize
- Color: Black / Red / Blue / FDE
- Weight: 0.2 oz
- Safety Spring: Length 12mm x OD 2.75mm x Gauge 0.3mm
Contents (Bill of Materials):
- 1x Aluminum Trigger Shoe
- 1x Trigger Safety
- 2x Trigger pin set screw
- 1x Trigger Safety Return Spring
- Trigger shoe only. Does not include trigger bar or trigger housing components.
- Aircraft grade aluminum construction
- Flat face
- Compatible with pre-travel adjustment modification
- Enhanced Trigger geometry
Disclaimer: Does not reduce trigger pull weight. Requires user-supplied fire control group components (trigger bar and housing, etc).
NOTE: It is strongly recommended to use with supplied Loctite. IF trigger is disassembled, reapplication is strongly recommended. Always ensure to thoroughly examine your firearm for safety and serviceability before shooting.
NOTE: Gunsmith or armorer installation recommended.